Career Opportunities

Principal Responsibilities: - Supports the Area in achieving key outcomes in safety, reliability, efficiency, compliance, cost and customer service.  - Provides technical, troubleshooting and maintenance support to all ASU, CO2, H2, and He plants within the area for all Electrical equipment including medium and high voltage substations/switchyards (up to 138KV), low | medium | high voltage switchgear, motor control centers, transformers, motors (up to 40,000HP), distribution systems along with associated protection and support equipment. - Provide day-to-day plant electrical support and assist with the execution of small improvement projects. - Work with Area controls engineers, mechanical engineers, as well as National Reliability Electrical and Instrumentation Engineers to support any respective initiatives or projects. - Assist with redlining, maintaining, and developing as necessary electrical documentation including single line diagrams, three-line diagrams, elementary diagrams, wiring schematics, layout drawings, interconnect drawings, cable and conduit schedules, panel schedules, & loop sheets. - Routinely review Electrical condition-based vendor data reports and provide recommendations and necessary repair plans for any noted deficiencies to ensure reliable operation (thermography, partial discharge monitoring, PdMA etc.) - Review and approve electrical and electrical PMs, work instructions, and related procedures and provide feedback and recommendations for changes as necessary. - Review the quality and completeness of electrical equipment PM execution at assigned plant locations and provide technical support with planning and execution. - Lead the troubleshooting and repair of critical failed electrical equipment including MOC guidance, plant/equipment outage decision making, repair plan, and root cause analysis - Identify, define, estimate, develop, and execute electrical turnaround maintenance activities. Supervise inspection and testing, overhaul, and replacement activities. Includes motors,  switchgear, substations, MCC's protective relay replacements and upgrades. Familiar with requirements for commissioning. - Manage and provide technical support to electrical contractors to ensure accurate scope completion, proper documentation updates, standards compliance, and applicable code compliance (IEEE, NEC, NFPA, etc.). - Provide Electrical execution support to the Projects Execution Team for major capital projects and new plant installations within the area.  - Represent the area’s electrical reliability interests in the proposal and project commercialization process, including the scope and spares input and new plant acceptance - Complete area electrical technical reviews of MOCs and provide supplemental engineering data, drawings, and analysis as necessary. - Leads the annual training and certification process of all area technicians in regard to NFPA 70E regulations, ensuring proper knowledge and practical training around the utilization of electrical equipment within each plant in the area. - Demonstrates continuous improvement by sharing best practices employed and adopting best practices identified by peers. - Perform instrumentation condition assessments for reliability, efficiency, spares gap, age and obsolescence. Monitors the completion of action plans to reduce and eliminate identified gaps and risks   Qualifications:  Education/Experience Requirements: - Bachelor’s Degree in Electrical Engineering required - 5 to 7 years of experience with at least 5 years in an operational and engineering environment working with electrical and instrumentation equipment. Other: - Demonstrated exceptional operational safety leadership - Self-started and self-directed with ability to manage multiple activities - good technical and communication skills with solid interpersonal skills - Knowledgeable and experienced working with installation, maintenance, and troubleshooting of substations/switchyards, switchgear, motor control centers, transformers, motors, and distribution systems along with associated protection and support equipment - Experience working with electrical equipment at a wide range of voltages from 138KVAC down to 24VDC. - Knowledge and experience working with electrical short circuit analysis, relay protection settings & coordination, power quality analysis, high voltage motor starting schemes and analysis, hazardous area classification and lightning protection - Knowledge of large high voltage motors and motor starters, induction and synchronous - Knowledge of predictive maintenance methodologies and technologies (Thermography, Partial Discharge Monitoring, PdMA testing, etc.) - Familiarity with National Electrical code and ability to reference applicable standards as needed - General understanding of regulatory and industry standards and codes - Air Separation experience and knowledge is a plus.   Join us and you will be part of a company that values and supports your career. We offer competitive pay and benefits, with set schedules, steady work and opportunities for ongoing training and career progression.   Together we value innovation, efficiency and flexibility. Putting safety first, and working with integrity and respect, we encourage everyone to find solutions for success. That means for our customers and for our colleagues. This makes us a great place to build a career where your skills are valued and developed.     #LI-JJ1

The Maintenance Technician is responsible for executing maintenance work to maintain efficient operations and upkeep of the facility’s manufacturing equipment and other related physical assets. The Maintenance Technician is a key contributor to the continuous improvement of critical plant performance metrics in the areas of safety, productivity, cost, quality and sustainability.   The Maintenance Technician is an hourly position reporting to the Maintenance Front Line Leader. JOB RESPONSIBILITIES                                                                                                                              - Lives the  Safety Stand and meets all safety requirements. Safety is a condition of employment. - Participates in the safety, quality, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, etc. - Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal. - Complies with all plant rules, safety regulations and job hazard analysis (JHA) requirements. - Performs cleanup duties at equipment areas, workstations, etc. - Maintains an uncompromising adherence to 5S standards; keeps the work area and equipment clean. - Collaborates with team members and participates in team discussions to achieve the goals of the plant.  - Proactively makes suggestions/proposals to strive for continuous improvement of plant performance. - Establishes goals, prioritizes and organizes actions, timelines and resources.  - Performs work tasks from SAP generated work descriptions and orders. - Completes all maintenance service requests as assigned. - Responds to emergency maintenance service requests while on-call. - Maintains and repairs manufacturing equipment and facilities using knowledge of mechanical, electrical and other related trades to ensure optimal operation. - Achieves productivity goals and minimizes downtime through completion of preventative maintenance to identify and remediate programs. - Works with engineering drawings, electrical diagrams, simple and complex sketches, related documents and verbal field instructions needed to perform assigned duties. - Troubleshoots, diagnoses and resolves mechanical and electrical issues throughout plant. - Interacts with vendors and suppliers to source materials and supervise repairs. - Meets committed downtimes and turns equipment over that functions properly. - Maintains and organizes machine and maintenance data. - Provides maintenance training to relevant stakeholders. - Assists with the on-boarding of new employees. - Helps ensure maintenance expenses stay within budget to contribute to bottom-line results. - Demonstrates flexibility to perform various job roles within the maintenance department as assigned.  - Provides relief to positions of prior qualification as required. - Actively focuses on achieving results and objectives; willing to go the extra mile when results do not meet expectations - Understands the needs of the customer and takes action to address those needs. - Acts decisively and shows a strong sense of urgency to ensure follow through of established goals. - Proactively identifies and participates in learning opportunities, and develops expertise in those areas. - Collaborates with internal customers, such as operators, to promote team-based problem solving. - Actively contributes to team collaboration for troubleshooting, even if the collaboration doesn’t lead to the fulfillment of immediate personal interest. - Utilizes site resources to solve problems to root cause, and implement actions that prevent reoccurrence. - Supports capital, equipment and process changes. - Obtains skills training to remain updated and ensure specialty knowledge. - Holds high standards for the quality of products and services, and proactively takes effective actions to meet the standards. JOB REQUIREMENTS EDUCATION AND EXPERIENCE                    - Seven to ten years of relevant work experience preferred - Mechanical and electrical industrial maintenance experience preferred - Troubleshooting and programming experience with Alan Bradley PLC's preferred  - Experience in troubleshooting and repair of three-phase power distribution systems  - Completion of a five year mechanical or electrical apprenticeship is a plus - Military training in electronics/electrical engineering is a plus - Must have a high school diploma or equivalent - Must be 18 years or older - Must be a US citizen or have the right to work in the US - Must be drug and alcohol free KNOWLEDGE, SKILLS & ABILITIES - Must read, write, and speak English - Must understand verbal and written instructions - Must possess strong communication and organizational skills - Must multi-task - Must have strong internal and external customer service skills - Must work well in a team environment - Must be self-motivated to work independently and meet targets - Must perform basic mathematical calculations - Must train and coach others - Must have strong process acumen and high mechanical aptitude - Must operate a computer and the necessary software to successfully perform job responsibilities - Must maintain scheduling flexibility to ensure smooth production - Must have quick decision making ability to overcome upset situations - Must secure and maintain job related qualifications and certifications as required by the nature of this position - Must perform well in a non-routine work environment - Must be proficient in mechanical and electrical machine systems troubleshooting and repair; must be able to use a variety of hand and power tools; must be proficient in one or more trades - Must be able to safely operate common power tools, hand tools, and meters - Must have maintenance knowledge with handling, installing, testing and operating all types of mechanical and electrical equipment including hydraulics, pneumatics, mechanical drives, motors, MCCs, electrical, HVAC, PLC, etc. - Must have maintenance spare part knowledge to locate and retrieve parts from Stores - Must have maintenance metrics knowledge to monitor, optimize and drive continuous improvement - Must have Troubleshooting and problem solving abilities with large industrial equipment ADDITIONAL REQUIRED TRAINING - All annual safety and role specific training, as required by the nature of this position ESSENTIAL PHYSICAL REQUIREMENTS - Rotating shifts – days and nights - Stand for extended, prolonged periods - Work overtime as needed - Meet the physical demands of the work environment RATE AND BENEFITS The hourly rate for this position is $37.77. We also offer a substantial benefits package including insurance (medical/dental/vision/life/disability/supplemental offerings), 401k (company contribution regardless of employee participation – plus match), liberal paid time off (vacation, personal floating and standard holidays), Employee Assistance Services, Stock Purchase Program – and more.   #cb #LI-JJ1  

Allied Reliability is seeking experienced Chemical Operators for a long-term Travel Contract Opportunity with one of our premier clients in the Westwego, LA area.  The Process Operator performs duties required to monitor, control, and operate process equipment and plant processes.  Performs duties as instructed by Supervision.  These duties include sampling, field operation, minor maintenance, continuous improvement programs, process safety, personal safety, environmental compliance, and product quality.

We are seeking a Maintenance Technician II - 2nd Shift to assist with maintaining an industrial laundry facility. *Must have Industrial Maintenance experience*

Allied Reliability is seeking a Maintenance Technician II/2nd Shift to assist with maintaining an industrial facility. *Must have Industrial Maintenance experience*

Job Description Company is seeking a Maintenance Technician II to assist with maintaining an industrial laundry facility.  Responsibilities include assisting with repairing, maintaining, installing and troubleshooting industrial equipment, systems and components including, but not limited to, washers, dryers, steam tunnels, conveyor systems and boilers; assisting with performing  preventive/predictive maintenance; resolving safety concerns; performing indoor and outdoor housekeeping; monitoring inventory supplies and maintaining maintenance records. Skills/Qualifications Required - 5+ years' experience repairing industrial processing equipment in an industrial environment or in the military - Ability to read maintenance literature printed in English - Experience with and ability to read a blueprint - Basic Microsoft Office computer skills - Ability to stand for up to 7 hours in an 8 hour shift - High School Diploma/GED   Preferred - Boiler knowledge - HVAC experience - Experience and ability to perform welding activities including MIG, TIG, ARC, cutting and brazing   Our employee-partners enjoy: - Competitive Pay - 401(k)/Profit Sharing/ESOP - Medical, Dental and Vision Insurance Package - Disability and Life Insurance Package - Paid Time Off and Holidays - Career Advancement Opportunities #LI-TS1 #CB

Allied Reliability is seeking experienced Maintenance Technicians for 3rd shift. These positions are direct hire with a reputable organization in the South Beloit, IL area.    The Maintenance Technician must be able to troubleshoot all equipment, conduct regular repairs and complete preventative maintenance as required. These are skilled mechanic positions requiring knowledge of equipment maintenance and electrical troubleshooting in an industrial manufacturing environment. 

 Allied Reliability is seeking a Maintenance Technician I to assist with maintaining an industrial laundry facility. *Must Have Industrial Maintenance Experience*. 

- Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. - Inspects plant equipment to identify potential problems prior to breakdown occurrences. - Answer line calls in a prompt manner and carry required tools to complete work safety and efficiently - Complete scheduled jobs and work orders as assigned - Assist during process upsets as needed. - Participating in Root Cause Analysis and Total Productive Maintenance (TPM) efforts through maintaining 5S standards and area/pillar activities as assigned. - Maintains safe and clean working environment. - Participate in safety and plant trainings. - Maintains electrical control software in support of programming for the facility - Programs HMIs, PLCs, Servos, and other electrical systems - Makes timely and appropriate decisions when an emergency or breakdown occurs so that production interruption is minimized - Diagnoses electrical problems and determines how to correct them, checking schematics, repair manuals, and parts catalogs as necessary - Instructs maintenance team members on proper electrical installation and repair techniques as appropriate - Coordinates contract electrical installations or repairs in the facility - Inspects electrical work in progress to ensure correct labor utilization and evaluate electrical training requirements   Must haves include… - High School Diploma or GED and be at least 18 Years Old - Minimum of 5 years related industrial experience industrial electrical maintenance or Associates Degree, certification, or applicable military training in Electrical Maintenance - Experience with: - Think under pressure and multi-task - Work independently, as well as part of a team, and have shift flexibility - Communicate, in English, in a clear and effective manner - Ability to read and interpret blueprints, schematics and P&ID drawings - In depth knowledge of manufacturing, industrial maintenance, and industrial machine control principles and practices. - Strong knowledge of LTT, energy control procedures and safe working procedures. - PLC and AC/DC drive experience. - Demonstrates flexibility to perform various job roles within the maintenance department as assigned. - Programs HMIs, PLCs, Servos, and other electrical systems - Accountable for keeping the Maintenance Leader and or Electrical Lead appraised of for electrical equipment conditions so that situations of major significance can be planned for to avoid major production downtime - Defines electrical spare parts needs, such that inventories are maintained at appropriate levels - Plans and lays out repair work, using diagrams, drawings, maintenance manuals, and schematic diagrams - Must have knowledge of electrical code. - Operate a computer, learn SAP and Microsoft Office Tools (Outlook, Excel, PowerPoint, etc.) There are some essential physical requirements specific to our work environment, including being able to: - Ability to work weekends, nights and on a 12-hour shift rotation - Ability to work overtime on short notice including weekends and holidays as needed. - Working from heights (up to 150ft) including man lifts & climbing ladders - Do repetitive movements (hand, arm, leg; bending and twisting at the waist; bending at the knee and squatting, push and pull 50 pounds) - Exposure to temperature extremes; sounds or noise levels that may be uncomfortable; and outside weather as needed - Must be eligible to work in the U.S. on a permanent basis

Essential Duties and Responsibilities: Industrial Electrician The ideal candidate will demonstrate the capability to maintain, repair, replace, or rebuild a wide variety of industrial manufacturing equipment and systems including, but not limited to: • HMI / PLC - Set up online communication between a laptop and HMI or PLC • Servo motors • Basic programming and editing • Replace motors and cables • Troubleshooting electrical problems on industrial manufacturing equipment • Maintain and repair electrical and heavy industrial mechanical equipment • Maintain and repair electrical equipment • Interpret drawings and electrical code specifications to determine layout of industrial electrical equipment installations • Replace equipment on existing electrical systems • Understand electrical wiring diagrams and schematics • Perform industrial electrical maintenance and troubleshooting in a manufacturing plant • Locate and repair trouble in wiring or electrical equipment • Install electrical components and systems • Identifying basic electrical symbols and reading electrical schematic diagrams • Isolating basic electrical control circuits • Shooting electrical systems and wiring and repairing complex electrical and electronic equipment or machinery • Maintain all electrical and electronic equipment, and electrical power • Performing routine preventative maintenance on electrical equipment • Interpret complex electrical wiring diagrams and schematics • Install various assemblies that require electrical wiring • Install, maintain, test, troubleshoot and repair industrial electrical equipment and associated electrical and electronic controls • Installing and repairing electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment • Calibrate, and repair electrical-pneumatic control systems • Maintain, install, and repair plant equipment electrical systems and facility electrical systems

The following description of duties and responsibilities are not inclusive of all duties to be performed by a Pipefitter working under this job description. The following description does not preclude others from performing duties that are the same as, or related to, these duties. The following description of duties and responsibilities does not entitle a Pipefitter Mechanic working under this job description rights to perform any of the following duties, as work performed by the pipefitter will be determined/assigned by the Pipefitter’s immediate supervisor and/or the Engineering Department. 1. Equipment Maintenance – Provide the highest level of support possible to production facilities with an intent of achieving superior equipment effectiveness as related to process and process support equipment. 2. Design and Engineering Support – Provide the highest level of support possible to Engineering and design resources. o Help document and develop standards for: ▪ Installing equipment and components ▪ Selecting standard piping & pneumatic components across the site ▪ Trade safety ▪ Preventive and predictive maintenance 3. Replacing obsolete or substandard components. Must have a thorough understanding and good working knowledge of pressure and mechanical codes as relates to vessels, piping, combustion, weights and measures. 4. Installs, calibrates, repairs and services pneumatic, hydraulic, electrical and mechanical types of instruments, scales and control; including integrated controls and related systems. 5. Must be able to obtain adjustments within the specified tolerances. 6. Performs testing as required and directed. 7. Maintains working knowledge of the proper and effective lubrication of valves, cylinders, gears, weights and interacting mechanical components. 8. Identify necessary human and materials resources required to complete tasks. 9. Develop a job plan for the work orders. 10.Must obtain and apply an adequate working knowledge of the process and energy systems in the plant; must be able to correct malfunctions rapidly and without error or endangerment to production, people or quality of product. 11.Instructs operating personnel as to proper care and operation of control equipment. As required, directs and leads other personnel assigned to the job, and provides assistance to engineers and technical personnel as directed. 12.Repair and inspect any steam, gas, air, hydraulic, water process piping, drain piping, and equipment in the plant. 13.Must be able to install rigging and hoisting for related equipment items. 14.Provide training to others and help identify training needs. 15.Reliability duties assigned to drive continuous improvement. 16.Drive continuous improvement in all areas of responsibility. 17.Attend RCA meetings as needed. 18.Other duties as assigned. Physical Requirements: The following physical demands are necessary for the Pipe fitter to perform daily duties. It would not be practical or feasible to eliminate these requirements. • Shall be able to safely climb stairs, scaffolds and ladder steps. • Shall be able to safely work from high surfaces. • Shall be able to safely utilize proper fall protection equipment. • Shall be able to safely lift up to 50 pounds while maintaining balance. • Shall be able to safely crawl over and/or under equipment. • Shall be able to safely perform job duties in extreme varying temperatures. • Shall be able to safely and skillfully use trade related to Job Qualifications: • Have the ability to perform all duties with a minimum amount of supervision. • Have complete knowledge of, and perform all duties in compliance with, the most current revision of plant safety, sanitation and working rules. • Have complete knowledge of and current Emergency Cardiovascular Care (ECC) certification for, Adult Cardiopulmonary Resuscitation (CPR), Automated External Defibrillator (AED) and First Aid (FA). To be considered current training must be successfully completed per requirements ECC guidelines. • Have complete knowledge of appropriate application and utilization of personal protective equipment specific to the trade. • Have complete knowledge of appropriate application, utilization and care of equipment and/or tools used in the trade. • Have solid knowledge of, and proficiency in mathematical functions used in the trade. • Use interpersonal skills to interact and work with others across the organization and in cross-functional teams. • Have a strong knowledge of current technology, and desire to expand upon that knowledge as related to the trade. • Willingness to participate in, or facilitate, trade related training as directed. • Successful completion of High School education program or equivalent state certification. • Successful Journeyman Apprenticeship or > 8000 hours documented in the field. • Have a strong understanding of Computer Systems operating on a window platform

Allied Reliability is seeking a Maintenance Technician II/2nd Shift to assist with maintaining an industrial facility. *Must Have Industrial Maintenance Experience*.